Page Loading...

Mouse over image to zoom, click to enlarge

Square D  |  XSAV11801


Catalog Number:  XSAV11801

UPC:  785901528036

Status:  nonstock

Your Price:  $237.22 / ea


Inductive Proximity Sensor; Type Metal; Operating Voltage 20 to 264 VAC/VDC; Number of Wires 2; Load Current 5 to 350 Milliampere (AC), 5 to 200 Milliampere (DC); Switching Frequency 100 Hz; Sensing Position Front; Sensing Distance 10 MM; Output Configuration NC; Shielding Type Shielded; Connection Type 2 M PVR Cable; Barrel Diameter 30 MM; Construction Threaded Barrel; Sensing Face Material PPS; Body Material Nickel Plated Brass; Operating Temperature -13 to 158 Deg F; Enclosure NEMA 1/3/4/6/12/13, IP67; Approval UL, CSA, CE, CCC; Mounting Type Flush




Additional Information

  • Mounting Type Flush
  • 18 Month Warranty
  • 25-Turn Potentiometer Provides Fine Adjustment of the Under Speed Threshold
  • LED Indicators for Switch in "Closed" State
  • Overload and Short Circuit Protection (SCP) on DC Models
  • Noise and Transient Protection
  • Reverse Polarity Protection on DC Models
  • Radio Frequency Immunity (RFI)
  • Built-in Fixed Power-Up Delay to Overcome Start-Up inertia
  • for Jamming Detection
  • for Zero-Speed, 120 - 3,000 Pulses/Min
  • Two Adjustment Ranges: 6 - 150 Pulses/Min
  • Linear Speed Threshold Adjustment
  • AC/DC Models are PLC Compatible
  • Universal AC/DC Versions
  • This Allows the Mechanical Assembly to Overcome inertia and Reach its Nominal Speed, Greatly Simplifying the interlocking Circuit
  • When the Line Voltage is initially Applied, the Output Automatically Assumes its Closed State for the Duration of the Start-Up Delay
  • to Preserve the Start Up Delay, the Switch Should be Reset by Removing and Reapplying the Power Supply
  • When the Actual Speed Falls below the Threshold Level-the Output Circuit Assumes its Open State
  • As Long as the Speed (Number of Pulses/Min) is Above the Threshold Level Adjustable Via 25 Turn Potentiometer within the Threshold Range-the Output Circuit Assumes its Closed State
  • The Zero Speed Condition is Used Extensively for Safety interlocking Applications, including: Conveyors, Pumps, Mixers, Centrifugal Separators, Elevators, Saws, and Crushers
  • Especially in the Cases of Medium and Large Motors
  • The Early Detection of the Under Speed Condition is Useful in Reducing Downtime Due to Jamming or Transmission Failure
  • The XSAV is a Self-Contained Device Used to Detect and Send Output Alarms for Machinery Under Speed or Zero-Speed Conditions, As Well as Early Jamming Detection


  • UNSPCS: 41111926
  • Package Height (Inch): 5.800
  • Package Length (Inch): 15.600
  • Package Width (Inch): 11.700
  • Package Weight (Pounds): 0.530
  • Item Weight (Pounds): 0.660
  • Approval: UL, CSA, CE, CCC
  • Enclosure: NEMA 1/3/4/6/12/13, IP67
  • Operating Temperature: -13 to 158 Deg F
  • Body Material: Nickel Plated Brass
  • Sensing Face Material: PPS
  • Construction: Threaded Barrel
  • Barrel Diameter: 30 MM
  • Connection Type: 2 M PVR Cable
  • Shielding Type: Shielded
  • Output Configuration: NC
  • Sensing Distance: 10 MM
  • Sensing Position: Front
  • Switching Frequency: 100 Hz
  • Load Current: 5 to 350 Milliampere (AC), 5 to 200 Milliampere (DC)
  • Operating Voltage: 20 to 264 VAC/VDC
  • Type: Metal


Catalog Pages(s)
Additional Specification Sheet
Installation Instructions
WARNING: This product may expose you to chemicals which are known to the State of California to cause cancer or birth defects and other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Time Zone 

Recently Viewed


View more >