EYSF75-AL - EYS Fill Vertical Conduit Sealing Fitting, 3/4"
Description
Specifications
0.4lb
0.8mm
5mm
8mm
For prevent passage of gases, vapors or flames from one portion of conduit system to another
Appleton
USA
MX
FITTING SEG CONDUIT 3/4IN ALMAG 35 AL
Smooth, rounded integral bushing in each hub to protect conductor insulation
Accurately tapped, tapered NPT threads for tight, rigid joints and ground continuity
Removable nipple in male sealing fitting may be used interchangeably in top or bottom hub
Large opening for damming and filling
Restrict any explosion to the sealed off enclosure
Required in Class I, Division 1 and 2 locations within 18 in of enclosures containing apparatus that may cause arcs, sparks or high temperatures
Required in Class I, Division 1 and 2 locations where 2 in or larger conduit enters enclosure, fitting housing terminals, splices or taps
Required in Class I, Division 1 and 2 locations at the boundary where conduit leaves classified location
Required in Class I, Division 1 and 2 locations where two or more enclosures are connected by 36 in or less conduit, seal must be located within 18 in of either enclosure
Required where cables which exceed rate of gas or vapor transmission permitted for seals are used in Class I, Division 2 locations
Tapered FNPT connection
25% fill vertical conduit sealing fittings
Emerson Electric
0.8000
IN
8.0000
IN
1
0.4000
LB
5.0000
IN
Appleton Group
ALUMINUM BODIES (CONDULETS - UNILETS)
Dimensions
3.63 in L x 1.38 in W
Finish
Epoxy Powder Coated
Material
Almag 35 Aluminum
Series
EYS
Size
IN
4-Mar
Suitable For Use With
IMC/Threaded Rigid Metallic Conduit
Type
Dust-Ignitionproof Explosionproof Raintight
