0 CART
items in your cartto quote Checkout
Ooops no items were found.
Try something else.
Ok
Loading…
Sorry, we could not find the stock amount. Try reloading the page.
no stock information available
To cart
Quote Me
Checkout
0
nVent Caddy

POOLMESH250 - Pool Mesh, 50' x 2'

Category Ground Rods & Grounding Systems
Picture of POOLMESH250 - Pool Mesh, 50' x 2'
nVent Caddy

POOLMESH250 - Pool Mesh, 50' x 2'

Item Code: 1078288
Category Ground Rods & Grounding Systems
Manufacturer NVENT ERICO
Manufacturer Ref POOLMESH250
Call for Availability
Add to Favorites
Compare

Fetching product details


Description

The requirements for bonding and grounding permanently installed indoor and outdoor swimming pools are provided in Article 680 “Swimming Pools, Fountains and Similar Installations" of the 2005 Edition of the National Electrical Code (NEC®). All of the bonded parts in or around swimming pools must be attached to an equipotential bonding grid. This grid must extend 3’ (0.91 m) beyond the inside surface of the pool under concrete, stone or other paved walking surfaces. Please note that pools made of non-conductive materials (fiberglass composite, vinyl lined polymer or other non-conductive materials) do not require an equipotential grid that covers the full contour of the bottom and sides of the pool. However, an equipotential grid is still required around the perimeter of the pool extending 3’ (0.91 m) beyond the sides of the pool.

Specifications

  • Brand : nVent CADDY
  • Category : GROUND RODS & GROUNDING SYSTEMS
nVent Caddy

POOLMESH250 - Pool Mesh, 50' x 2'

Category Ground Rods & Grounding Systems
Picture of POOLMESH250 - Pool Mesh, 50' x 2'
nVent Caddy

POOLMESH250 - Pool Mesh, 50' x 2'

Item Code: 1078288
Category Ground Rods & Grounding Systems
Manufacturer NVENT ERICO
Manufacturer Ref POOLMESH250
Call for Availability
Add to Favorites
Compare

Fetching product details


Description

The requirements for bonding and grounding permanently installed indoor and outdoor swimming pools are provided in Article 680 “Swimming Pools, Fountains and Similar Installations" of the 2005 Edition of the National Electrical Code (NEC®). All of the bonded parts in or around swimming pools must be attached to an equipotential bonding grid. This grid must extend 3’ (0.91 m) beyond the inside surface of the pool under concrete, stone or other paved walking surfaces. Please note that pools made of non-conductive materials (fiberglass composite, vinyl lined polymer or other non-conductive materials) do not require an equipotential grid that covers the full contour of the bottom and sides of the pool. However, an equipotential grid is still required around the perimeter of the pool extending 3’ (0.91 m) beyond the sides of the pool.

Specifications

  • Brand : nVent CADDY
  • Category : GROUND RODS & GROUNDING SYSTEMS
SEARCH ×