0 CART
items in your cartto quote Checkout
Ooops no items were found.
Try something else.
Ok
Loading…
Sorry, we could not find the stock amount. Try reloading the page.
no stock information available
To cart
Quote Me
Checkout
0
Ideal

33-856 - VDV MultiMedia Cable Tester

Category Network Cables Testers
Picture of 33-856 - VDV MultiMedia Cable Tester
Ideal

33-856 - VDV MultiMedia Cable Tester

Item Code: 148796
Category Network Cables Testers
Manufacturer Ideal Industries
Manufacturer Ref 33-856

Document
Document
Call for Availability
Add to Favorites
Compare

Description

The 33-856 VDV Tester is an LCD based all-in-one basic Voice-Data-Video tester for verifying proper wiring of low-voltage and data communications cables. The primary function of the VDV is the wiremap test. The wiremap test visually shows, pin by pin, whether a cable is terminated properly at both ends and if there is continuity from end to end. The VDV can test Data/Ethernet RJ-45 (8P8C), Voice/Phone RJ-11/12(6P6C/6P4C), and Video/coax cables. The LCD visually displays “PASS” or “ERROR” after each test to verify if the cable is terminated correctly.In Data mode, the RJ-45 port tests RJ-45 connector cables terminated to Cat 3/5/5e/6/6a twisted pair cables. When the test is activated, VDV checks each conductor of the cable for any opens terminated or cut conductors), shorts (cut or nicked conductors that come into contact), miswires (wires out of order – not consistent at both ends), reversals, or split pairs (wired correctly but using wrong conductor order and grouping). VDV can accurately identify and alert the user to uplink/crossover cables.Test results are displayed on the LCD in a pin-to-pin format. Error types are also displayed on the LCD.Shield continuity can also be tested on shielded RJ-45 connectors and cables.In Voice mode, the RJ-11/12 port is active. Testing is similar to the Data test, but tests up to 6 conductors instead of 8.In Video mode, the F port is active. Coax cables are tested for opens and shorts on the pin and shield.For all tests, the included main remote (Remote #1) is used to terminate the far end of the cable run. The main remote is stored in the base of the tester when not in use.A built in analog tone generator is also included and can be used in all testing modes. The tone generator has 4 user selectable tones. Toning helps to locate and identify a single cable that is within a bundle of cables. The tone generator has the ability to tone by pin, by pair, or the all conductors at once. This allows the user to more precisely locate errors within the cable, such as finding opens.The 62-164 Amplifier probe (sold separately) is recommended for use in amplifying the tone signal.

Specifications

Weight

0.75lb

Height

2mm

Width

6mm

Length

11mm

AD Application

For voice, data, video, testing in residential and commercial environments

AD Brand (Description)

Ideal

AD Country

USA

AD Country Of Origin

CN

AD Invoice Description

CABLE TESTER KIT VDV MULTI-MEDIA

AD Item Features 01

Voice/Data/Video LCD based wire mapper verifies cable continuity

AD Item Features 02

Identifies errors by pin - shorts, opens, miswires, reversals, and split pairs

AD Item Features 03

For twisted pair, coax, and phone type cables

AD Item Features 04

RJ-45, RJ-11/12, and Female F port interfaces

AD Item Features 05

Tone generator with 4 selectable tones

AD Manufacturer (Description)

Ideal Industries

AD Package Height

2.0000

AD Package Height UOM

IN

AD Package Length

11.0000

AD Package Length UOM

IN

AD Package Quantity

1

AD Package Volume

132.0000

AD Package Volume UOM

cu-in

AD Package Weight

0.7500

AD Package Weight UOM

LB

AD Package Width

6.0000

AD Package Width UOM

IN

Brand

Ideal Industries

Category

Network Cables Testers

Spec 1 Attribute

Cable Type

Spec 1 Attribute Value

RJ11/12/45/Coaxial Type F

Spec 2 Attribute

Dimensions

Spec 2 Attribute Value

5.2 in L x 2.9 in W x 1.6 in H

Spec 3 Attribute

Display Type

Spec 3 Attribute Value

Digital LCD

Spec 4 Attribute

Type

Spec 4 Attribute Value

VDV Multi-Media

Ideal

33-856 - VDV MultiMedia Cable Tester

Category Network Cables Testers
Picture of 33-856 - VDV MultiMedia Cable Tester
Ideal

33-856 - VDV MultiMedia Cable Tester

Item Code: 148796
Category Network Cables Testers
Manufacturer Ideal Industries
Manufacturer Ref 33-856

Document
Document
Call for Availability
Add to Favorites
Compare

Description

The 33-856 VDV Tester is an LCD based all-in-one basic Voice-Data-Video tester for verifying proper wiring of low-voltage and data communications cables. The primary function of the VDV is the wiremap test. The wiremap test visually shows, pin by pin, whether a cable is terminated properly at both ends and if there is continuity from end to end. The VDV can test Data/Ethernet RJ-45 (8P8C), Voice/Phone RJ-11/12(6P6C/6P4C), and Video/coax cables. The LCD visually displays “PASS” or “ERROR” after each test to verify if the cable is terminated correctly.In Data mode, the RJ-45 port tests RJ-45 connector cables terminated to Cat 3/5/5e/6/6a twisted pair cables. When the test is activated, VDV checks each conductor of the cable for any opens terminated or cut conductors), shorts (cut or nicked conductors that come into contact), miswires (wires out of order – not consistent at both ends), reversals, or split pairs (wired correctly but using wrong conductor order and grouping). VDV can accurately identify and alert the user to uplink/crossover cables.Test results are displayed on the LCD in a pin-to-pin format. Error types are also displayed on the LCD.Shield continuity can also be tested on shielded RJ-45 connectors and cables.In Voice mode, the RJ-11/12 port is active. Testing is similar to the Data test, but tests up to 6 conductors instead of 8.In Video mode, the F port is active. Coax cables are tested for opens and shorts on the pin and shield.For all tests, the included main remote (Remote #1) is used to terminate the far end of the cable run. The main remote is stored in the base of the tester when not in use.A built in analog tone generator is also included and can be used in all testing modes. The tone generator has 4 user selectable tones. Toning helps to locate and identify a single cable that is within a bundle of cables. The tone generator has the ability to tone by pin, by pair, or the all conductors at once. This allows the user to more precisely locate errors within the cable, such as finding opens.The 62-164 Amplifier probe (sold separately) is recommended for use in amplifying the tone signal.

Specifications

Weight

0.75lb

Height

2mm

Width

6mm

Length

11mm

AD Application

For voice, data, video, testing in residential and commercial environments

AD Brand (Description)

Ideal

AD Country

USA

AD Country Of Origin

CN

AD Invoice Description

CABLE TESTER KIT VDV MULTI-MEDIA

AD Item Features 01

Voice/Data/Video LCD based wire mapper verifies cable continuity

AD Item Features 02

Identifies errors by pin - shorts, opens, miswires, reversals, and split pairs

AD Item Features 03

For twisted pair, coax, and phone type cables

AD Item Features 04

RJ-45, RJ-11/12, and Female F port interfaces

AD Item Features 05

Tone generator with 4 selectable tones

AD Manufacturer (Description)

Ideal Industries

AD Package Height

2.0000

AD Package Height UOM

IN

AD Package Length

11.0000

AD Package Length UOM

IN

AD Package Quantity

1

AD Package Volume

132.0000

AD Package Volume UOM

cu-in

AD Package Weight

0.7500

AD Package Weight UOM

LB

AD Package Width

6.0000

AD Package Width UOM

IN

Brand

Ideal Industries

Category

Network Cables Testers

Spec 1 Attribute

Cable Type

Spec 1 Attribute Value

RJ11/12/45/Coaxial Type F

Spec 2 Attribute

Dimensions

Spec 2 Attribute Value

5.2 in L x 2.9 in W x 1.6 in H

Spec 3 Attribute

Display Type

Spec 3 Attribute Value

Digital LCD

Spec 4 Attribute

Type

Spec 4 Attribute Value

VDV Multi-Media

SEARCH ×