0 CART
items in your cartto quote Checkout
Ooops no items were found.
Try something else.
Ok
Loading…
Sorry, we could not find the stock amount. Try reloading the page.
no stock information available
To cart
Quote Me
Checkout
0
Lutron

MS-Z101-IV - 0-10V DIMMER SENSOR IVORY

Category Lighting Occupancy Sensors
Picture of MS-Z101-IV - 0-10V DIMMER SENSOR IVORY Picture of MS-Z101-IV - 0-10V DIMMER SENSOR IVORY
Picture of MS-Z101-IV - 0-10V DIMMER SENSOR IVORY Picture of MS-Z101-IV - 0-10V DIMMER SENSOR IVORY
Lutron

MS-Z101-IV - 0-10V DIMMER SENSOR IVORY

Item Code: 906494
Category Lighting Occupancy Sensors
Manufacturer LUTRON ELECTRONICS
Manufacturer Ref MS-Z101-IV

Catalog
Full Engineering Drawing
Instruction Installation Manual
Line Drawing
Warranty Information
Call for Availability
Add to Favorites
Compare

Description

The Lutron Maestro 0-10V Motion Sensor/Dimmer Switch works just like a Lutron Maestro dimmer with the addition of Lutron’s advanced motion sensing technology to automatically and gradually turn the lights on and off. The 0-10V Motion Sensor/Dimmer Switch is rated to work with all drivers that provide a current source, up to 8A switching LED drivers and 50mA max sink current. Install in a single pole, 3-way with existing switch, or with Maestro companion switches (MA-AS/MSC-AS) to switch from up to 9 locations. Use the raise/lower buttons to adjust the light level for any activity or set the preset level to ensure lights always turn on to your desired light level automatically. The passive infrared (PIR) sensor, covered by a tamper resistant lens, detects heat from occupants moving and has a 180-degree field of view (900 sq ft major motion & 400 sq ft minor motion coverage). Equipped with smart ambient light detection (ALD), you can customize your sensing dimmer to detect daylight, so lights don't turn on when enough natural light is present in the room. Unlike other manufacturers, Lutron sensors use Cross Correlation Technology (XCT) to also detect fine motion, such as typing at a desk or reading a book – ensuring lights won’t turn off inadvertently when you’re still in the room. Easy to read programming buttons directly on the sensor allow for customization of both the dimmer and the sensor’s functions, such as timeout, occupied level and sensor mode. Lutron sensors have an adjustable timeout (1, 5, 15 or 30 minutes) to control how long the lights stay on after leaving the room. The occupied level is the brightness the sensor will turn on when motion is detected. Change the sensor to vacancy mode to meet Title 24 requirements: lights only turn on with a manual press of the tap switch but automatically turn off if the sensor no longer detects motion. Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).

Specifications

Height

4.5mm

Width

3.38mm

Length

2.25mm

Amperage Rating

8 A

Brand

Lutron

Category

LIGHTING OCCUPANCY SENSORS

Color

Ivory

Connection Type

Hardwire

Control Output

Manual On/Automatic Off/Automatic On/Automatic Off

Coverage

400 sq-ft Minor, 900 sq-ft Major

Dimensions

4-11/16 in H x 2-15/16 in W x 1-1/8 in D

Enclosure Type

NEMA WD7

Lamp Type

Fluorescent/LED

Mounting Type

Wall

Response Frequency

50/60 Hz

Sensor Type

Passive Infrared

Series

Maestro®

Temperature Rating

32 to 104 deg F

Time Delay

10 s

Type

1-Pole Multi-Location

Viewing Angle

180 deg

Voltage Rating

120 to 277 V AC

Lutron

MS-Z101-IV - 0-10V DIMMER SENSOR IVORY

Category Lighting Occupancy Sensors
Picture of MS-Z101-IV - 0-10V DIMMER SENSOR IVORY Picture of MS-Z101-IV - 0-10V DIMMER SENSOR IVORY
Picture of MS-Z101-IV - 0-10V DIMMER SENSOR IVORY Picture of MS-Z101-IV - 0-10V DIMMER SENSOR IVORY
Lutron

MS-Z101-IV - 0-10V DIMMER SENSOR IVORY

Item Code: 906494
Category Lighting Occupancy Sensors
Manufacturer LUTRON ELECTRONICS
Manufacturer Ref MS-Z101-IV

Catalog
Full Engineering Drawing
Instruction Installation Manual
Line Drawing
Warranty Information
Call for Availability
Add to Favorites
Compare

Description

The Lutron Maestro 0-10V Motion Sensor/Dimmer Switch works just like a Lutron Maestro dimmer with the addition of Lutron’s advanced motion sensing technology to automatically and gradually turn the lights on and off. The 0-10V Motion Sensor/Dimmer Switch is rated to work with all drivers that provide a current source, up to 8A switching LED drivers and 50mA max sink current. Install in a single pole, 3-way with existing switch, or with Maestro companion switches (MA-AS/MSC-AS) to switch from up to 9 locations. Use the raise/lower buttons to adjust the light level for any activity or set the preset level to ensure lights always turn on to your desired light level automatically. The passive infrared (PIR) sensor, covered by a tamper resistant lens, detects heat from occupants moving and has a 180-degree field of view (900 sq ft major motion & 400 sq ft minor motion coverage). Equipped with smart ambient light detection (ALD), you can customize your sensing dimmer to detect daylight, so lights don't turn on when enough natural light is present in the room. Unlike other manufacturers, Lutron sensors use Cross Correlation Technology (XCT) to also detect fine motion, such as typing at a desk or reading a book – ensuring lights won’t turn off inadvertently when you’re still in the room. Easy to read programming buttons directly on the sensor allow for customization of both the dimmer and the sensor’s functions, such as timeout, occupied level and sensor mode. Lutron sensors have an adjustable timeout (1, 5, 15 or 30 minutes) to control how long the lights stay on after leaving the room. The occupied level is the brightness the sensor will turn on when motion is detected. Change the sensor to vacancy mode to meet Title 24 requirements: lights only turn on with a manual press of the tap switch but automatically turn off if the sensor no longer detects motion. Available in 10+ colors. Pairs perfectly with Lutron Claro wall plates for consistent color matching (sold separately).

Specifications

Height

4.5mm

Width

3.38mm

Length

2.25mm

Amperage Rating

8 A

Brand

Lutron

Category

LIGHTING OCCUPANCY SENSORS

Color

Ivory

Connection Type

Hardwire

Control Output

Manual On/Automatic Off/Automatic On/Automatic Off

Coverage

400 sq-ft Minor, 900 sq-ft Major

Dimensions

4-11/16 in H x 2-15/16 in W x 1-1/8 in D

Enclosure Type

NEMA WD7

Lamp Type

Fluorescent/LED

Mounting Type

Wall

Response Frequency

50/60 Hz

Sensor Type

Passive Infrared

Series

Maestro®

Temperature Rating

32 to 104 deg F

Time Delay

10 s

Type

1-Pole Multi-Location

Viewing Angle

180 deg

Voltage Rating

120 to 277 V AC

SEARCH ×