0 CART
items in your cartto quote Checkout
Ooops no items were found.
Try something else.
Ok
Loading…
Sorry, we could not find the stock amount. Try reloading the page.
no stock information available
To cart
Quote Me
Checkout
0
Square D

A11.0 - Thermal Unit, Type S, Type A, melting alloy, Class 20

Category Thermal Overload Heater Elements
Picture of A11.0 - Thermal Unit, Type S, Type A, melting alloy, Class 20
Square D

A11.0 - Thermal Unit, Type S, Type A, melting alloy, Class 20

Item Code: 17811
Category Thermal Overload Heater Elements
Manufacturer SCHNEIDER ELECTRIC
Manufacturer Ref A11.0

Full Engineering Drawing
Specification Sheet
Call for Availability
Add to Favorites
Compare

Description

Thermal units are intended to protect motors, controllers, and branch circuit conductors against excessive heating due to prolonged motor over currents up to and including locked rotor currents. Protection of the motor and the other branch circuit components from higher currents, due to short circuits or grounds, is a function of the branch circuit fuses or circuit breakers. Class 20 thermal units respond to overload current conditions according to trip curves. These thermal units will trip in 20 seconds or less on overload conditions. These thermal units will trip in 20 seconds or less on overload conditions. These thermal units have a one piece construction. The motor current passes through a small heater winding within these thermal units. Under overload conditions, the heat causes a special solder to melt allowing a ratchet wheel to spin free thus opening the control circuit contacts and opening the motor contacts.

Specifications

Weight

0.04lb

Height

0.8mm

Width

1.19mm

Length

2.48mm

Amperage Rating

0.005 to 6 A

Brand

Square D

Category

THERMAL OVERLOAD HEATER ELEMENTS

Frequency Rating

45 to 65 Hz

Full Load Current

6.83 to 9 A

Mounting Type

Plug-In

Power Rating

5 VA

Size

3.78 in L x 3.78 in W x 2.78 in D

Temperature Rating

40 deg C

Trip Type

Class 20/Standard

Type

Melting Alloy

Voltage Rating

600 V AC

Square D

A11.0 - Thermal Unit, Type S, Type A, melting alloy, Class 20

Category Thermal Overload Heater Elements
Picture of A11.0 - Thermal Unit, Type S, Type A, melting alloy, Class 20
Square D

A11.0 - Thermal Unit, Type S, Type A, melting alloy, Class 20

Item Code: 17811
Category Thermal Overload Heater Elements
Manufacturer SCHNEIDER ELECTRIC
Manufacturer Ref A11.0

Full Engineering Drawing
Specification Sheet
Call for Availability
Add to Favorites
Compare

Description

Thermal units are intended to protect motors, controllers, and branch circuit conductors against excessive heating due to prolonged motor over currents up to and including locked rotor currents. Protection of the motor and the other branch circuit components from higher currents, due to short circuits or grounds, is a function of the branch circuit fuses or circuit breakers. Class 20 thermal units respond to overload current conditions according to trip curves. These thermal units will trip in 20 seconds or less on overload conditions. These thermal units will trip in 20 seconds or less on overload conditions. These thermal units have a one piece construction. The motor current passes through a small heater winding within these thermal units. Under overload conditions, the heat causes a special solder to melt allowing a ratchet wheel to spin free thus opening the control circuit contacts and opening the motor contacts.

Specifications

Weight

0.04lb

Height

0.8mm

Width

1.19mm

Length

2.48mm

Amperage Rating

0.005 to 6 A

Brand

Square D

Category

THERMAL OVERLOAD HEATER ELEMENTS

Frequency Rating

45 to 65 Hz

Full Load Current

6.83 to 9 A

Mounting Type

Plug-In

Power Rating

5 VA

Size

3.78 in L x 3.78 in W x 2.78 in D

Temperature Rating

40 deg C

Trip Type

Class 20/Standard

Type

Melting Alloy

Voltage Rating

600 V AC

SEARCH ×